Top 10 Things That Slow Down Your Internet: With Effective Solutions to Increase WiFi Speed
Many people suffer from the slow or frequent interruption of Internet connectivity without justification and reason. But we know that there are a lot of factors that help to interrupt Internet connectivity and hamper the WiFi network, which affects the usual Internet speed. Those reasons may lie in some very small problems that we can not notice for ourselves, making the Internet very poor and useless and thus disrupting a lot of daily work and tasks that people must do on time without delay. The good news is that there are a lot of solutions that can address the problem that we have in slowing down the speed and interruption of the Internet, so today we will talk about how to increase the speed of the WiFi Cat network in simple steps. By following these steps you can get stronger, faster WiFi and a continuously connected and fast internet.
It is worth mentioning that many reasons can help to slow down the Internet and WiFi network, including some problems related to the installation of the radio erroneously and inappropriately, thereby impairing the access of the WiFi network signals from the router to the home devices, whether computers or tablets and therefore there are some things to consider and pay attention to when installing the WiFi at Home network to facilitate the Internet reception process from the router to devices
10 Things That Slow Down Your Internet
Today we will talk about nine problems that the user may encounter when connecting to the Internet that leads to poor or interrupted connectivity and how to deal with and solve those problems during some simple steps:
The first problem: is the presence of a large number of devices in the house which hampers access to Wi-Fi signals
Home devices other than computers, phones, and tablets are things that impede the access of WiFi network signals from the router for related devices such as cameras, lamps, remote controls, vacuum cleaners, and smart sockets The presence of a large number of devices may hinder WiFi access to devices, slow down Internet speed, or even disconnect Internet connectivity.
This is because all these smart devices work when connecting to the Internet like smart bulbs, although they don't use much contact data, they may be one of the reasons why the Internet is slow and the WiFi network is weak. Internet connectivity may be unable to distribute Internet connectivity on many devices simultaneously causing Internet connectivity interruptions in some devices.
Solving the problem:
The best way to solve this problem is to upgrade to a newer router or buy a new router that is a fairly modern version. The routers have a virtual lifespan and thus over time will not be able to adapt to modern and sophisticated devices that operate in connection with the Internet and there are a lot of modern and sophisticated home routers that work efficiently in dealing with all kinds of devices at home and send network signals.
- Ubiquiti UniFi is one of the most modern and sophisticated routers that can adapt to modern and highly intelligent devices that operate through the use of Internet data and connectivity and is suitable for homes with large spaces and large companies.
- The Ubiquiti AmpliFi router is suitable for homes with fairly small areas as it is budget-friendly.
- In the case of using smart sensors, the Z-Wave router can be purchased as it is capable of launching different frequencies from WiFi network frequencies and therefore you will not have any problems overlapping frequencies together.
Second problem: placing the router in an inappropriate place
A common problem with Internet connectivity is the placement of routers and routers in poorly ventilated and inappropriate places where they may be placed in enclosed spaces in all directions with no air and many walls or insulators making it difficult to access the WiFi network of routers and thus affects the speed of the Internet as the routers send signals to other connected devices and are located inside routers
Solving the problem:
The 2.4 GHz signal, known as n, b, g, or 5 GHz, must be activated. It is considered to be the fastest and most powerful WiFi signal in terms of its ability to penetrate obstacles or walls in the house and pass through them so that it can penetrate hard hefts and reach far from the router.
The router should also be placed in a place where there are not many walls and obstacles because it has a very bad impact on the signals and scope of the WiFi network. In case the user has to place the router in a particular place or is difficult to move, the Ethernet Ethernet cable should be connected elsewhere in your home and your WiFi network should be directed elsewhere.
The third problem: The many users of the Internet at home
When many people use WiFi, connectivity is slow, and also the variety of devices used such as desktops, tablets, smartphones, smart TVs that work through the use of Internet connection data, PlayStation devices, games, virtual reality goggles, and other home devices that need continuous Internet connection despite not consuming much Internet connection data All of that, as well as updates made by computer operating systems and other devices automatically that need to consume some of the Internet connection data.
Solving the problem:
- Initially, you should check your router settings to make sure no authoritarian devices or any other users are using your WiFi network. Thus, you can determine the number of devices and people using your WiFi network and prevent bullies and intruders from using them. You can also determine the speed of the Internet for some devices connected to the WiFi network at home.
- Also, through the router settings page, you can select which apps and software are available to consume a certain amount of the Internet or select the Internet usage of some apps and software that are not always used to get the best performance.
Problem 4: Use somewhat old ethernet cables
In some cases, people use old Ethernet cables to connect the router and other home devices from desktops or laptops directly connected to the router. Here, these cables should be checked and checked well and whether they have already been consumed or are still in good condition. It is worth noting that these cables can operate for up to many years without problems. There are also types of advanced and powerful cables that can withstand sustain conditions.
Solving the problem:
- First, as mentioned, the cables must be well checked and their age verified by looking at the specifications of the Cat number. If you have a Cat-5 number, it is considered to be old and relatively slow. It also has a limited performance of up to 100 Mbps. Here you can change to the Cat-5e cable, which is the fastest used where it can reach the speed of 1000Mbps and you can also use the 6a cable or cable Cat-6 which is the fastest used.
- In case you do not want to change the cable you can check the cable well to make sure that all eight wires are connected to it and to each other and are located inside the cable, because any fault with them may slow down the speed or interruption of the internet.
- Change old or consumed-type cables to newer-type cables or replace broken parts with type. You can upgrade to newer-type cables but they will perform the same purpose as the types of cables we mentioned above in terms of internet speed and performance.
Problem 5: Using extenders for WiFi or Powerline converters
Many people use WiFi extenders to solve all internet speed problems. These extensions come in the form of a small box connected to the power source and work on repeating WiFi signals to connect them to all parts of the house in addition to using Powerline payloads that contribute to transmitting WiFi signals to all devices in the house through electrical cables, believing people
Solving the problem:
This problem can be solved by upgrading the WiFi network system or UniFi system which allows WiFi signals to be connected to all devices in homes with large and large spaces.
Problem 6: Living in a place full of lots of routers
Staying in a crowded place with routers is tired of the work of the device, where there is a great overlap between the signals and frequencies transmitted by those devices, which hampers the signals of your device, and therefore you prefer to stay in a place where there are no Internet networks in abundance and you can see if the place you are in is full of routers or not through the use of a dedicated app such as Wifi Anal
Solving the problem:
The solution is to choose a modern and sophisticated router since modern routers work intelligently so that they can choose the best channel to send frequencies and signals in any circumstances.
Another solution is to reduce the number of devices connected to your router in your home so you can get the best internet speed and better bandwidth for one or two devices. If you have an Ethernet cable, connect it to your desktop and save WiFi when you need it.
Problem 7: Using a server for slow DNS:
In all DNS there is a server known as ISP. It is worth mentioning that the DNS service is the guide that can translate what you write through your browser from addresses where it converts it into its language or IP addresses. The device is understood so that it searches and shows the results that the user wants and those servers may be slow as not all servers are equal. And the DNS server available on your device is just a virtual server and is often slow and unreliable as well and you will notice it in case you find or notice slow while typing the address on your web browser and showing the desired results or taking a long time to download the page so you should know that there is a problem with your server.
Solving the problem:
Here you need to change your DNS server to another faster one and this step enables you to keep your privacy from hackers as well as increase internet speed while browsing the web.
Problem 8: Using a limited Internet package
A person may use a limited Internet package and upload a lot of files online, making them run in a short time As the user may be working intensively online and thus Internet service providers slow down their Internet speeds due to excessive usage or exceeding the set quantity and consumption of all package. Once you reach a certain amount of uploads or share files, the Internet starts to reduce its speed. Here you should contact your Internet service providers and find out why you should be aware of your usual speed and check it regularly.
Solving the problem:
The solution here is to reduce and reduce your Internet usage, reduce the number of files you upload or share online, or use a VPN to hide your online activity.
Problem 9: Use the old USB 3.0 port
If the old USB 3.0 port is used, it may affect internet speeds such as the first version of it, as it interferes with 2.4 GHz signal frequencies. However, advanced USB 3.0 ports have provided good speeds and have recently been stunned.
Solving the problem:
You can replace the old USB 3.0 port with a new and sophisticated one and USB 3.0 ports are blue. You can check this by using it with low bandwidth devices such as wireless mouse or keyboard. USB 2.0 port can be used with the older version which comes in black.
Finally, you need to make sure that your equipment fits into the sophisticated routers or vice versa. You may buy a modern and sophisticated router. In return, you work on a desktop device with a very old version.
Tenth problem: the use of old routers
The main reason for the slowness of the home Wi-Fi network can be the use of older versions of routers that are not compatible with receivers that support sophisticated Wi-Fi networks from new phone versions or newly released laptops, so when buying a new router must be sure to support different frequencies of the Wi-Fi network.
